If you have a fire or water emergency, please call us now at (423) 434-0046

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

Things That Go Bump in the Water Heater

3/16/2019 (Permalink)

A water heater flush is a great way to ensure that your appliance is operating smoothly.

Things That Go Bump In The Water Heater 

Have you ever been home alone in Cherokee, TN and heard a strange noise only to realize it was coming from your water heater? We often forget about this appliance until something goes wrong, and while not every noise it makes is cause for concern, giving it proper attention is necessary to keep it running smoothly for years.

One common issue that causes popping and crackling is sediment build-up. Over time, sediment collects on the bottom of the tank and around the element tubes. Every time you use your hot water, it has to force its way through this build-up, causing those noises you hear. Loose sediment can also cause rumbling sounds. Luckily, fixing this problem is easy with a water heater flush. Here's how to do it:

1. Turn Off the Power

Before you begin, make sure to shut off the power source to your water heater. This is a vital step for avoiding injury.

2. Flush the Tank

Attach a garden hose to the drain valve of your tank. Make sure the other end of the hose is in an appropriate location for drainage. Open the drain valve and let the water flow. While the tank is draining, turn on the hot water in your kitchen. Let the hot water run for a few minutes, then close the tank’s incoming water supply valve until the hose runs dry. Next, turn the supply valve on again for a final flush before turning it off again.

3. Fill It Up

With the water in your kitchen or bathroom still running, turn on the tank water supply once more. Watch the kitchen faucet run until the gaps in the water flow stop, indicating that the tank is full. Then you can turn the faucet off.

4. Turn It Back On

Once the tank is full, turn the energy supply back on. Your tank flush is complete.

A water heater flush is a great way to ensure that your appliance is operating smoothly. If you are concerned about the noises coming from your water heater, a home repair specialist can provide an expert second opinion and help you flush the unit.

Other News

View Recent Posts